Suunto D5 - Getting Started; Initial Device Setup

2. Getting started
2.1. Set Up
To get the most out of your Suunto D5, use some time to customize features and dive views.
Make absolutely sure that you know your computer and have it set up as you want before
getting into the water.
To get started:
1. Wake up the device by connecting the USB cable to a PC/Mac or a power source. Use a
USB port of 5 Vdc, 0.5A.
2. Follow the startup wizard to set up the device. When ready, the device goes to surface
state.
3. Fully charge before first dive.
The startup wizard guides you through:
•
Language
•
Units
•
Time format (12h/24h)
•
Date format (dd.mm / mm.dd)
•
Time and date
•
Connecting with Suunto app (optional)
2.2. Display - modes, views, and states
Your Suunto D5 has three buttons that have
dierent functions in dierent views. Short
pressing or long pressing them gets you to dierent functionalities.
Suunto D5
9