82 RV125K7 (’07-MODEL)
• Remove the HO2 sensor 2.
• Installation is in the reverse order of removal.
• Tighten the HO2 sensor to the specified torque.
HO2 sensor: 25 N·m (2.5 kgf-m)
Do not remove the HO2 sensor while it is hot.
* Be careful not to expose the HO2 sensor to exces-
sive shock.
* Do not use an impact wrench while removing or
installing the HO2 sensor.
* Be careful not to twist or damage the HO2 sensor
lead wires.
Do not apply oil or other materials to the HO2 sensor
air holes.
To Next Page