86 RV125K7 (’07-MODEL)
FUEL FILTER
REMOVAL
• Remove the right frame cover. (RV125K3 5-3)
• Remove the screws.
• Place a rag under the hose joint and disconnect the fuel
hoses.
• Remove the fuel filter 1.
INSPECTION
• When gosoline is poured lightly to the fuel filter from the port
1, the gasoline should flow out through the port 3 smoothly.
• Also, check for clogging from the port 2 to 3.
• If any defects are found, replace the fuel filter with a new one.
INSTALLATION
Installation is in the reverse order of removal. Pay attention to
the following point:
• Rout the fuel hoses properly. (Page 95)
* Drain out fuel before removing the fuel filter.
* Do not drain fuel while engine is hot.
Gasoline is highly flammable and explosive.
Keep heat, spark and flame away.
Always use extreme caution when handling gasoline.
To Next Page