EXHAUST SYSTEM 6-5
• Disconnect the No.2 cable and then No.1 cable from the
pulley.
• Remove the EXCVA.
• Hold the EXCVA pulley with an adjustable wrench, and
loosen the pulley mounting bolt.
• Remove the EXCVA pulley from the EXCVA body.
EXCVA PULLEY INSPECTION
• Inspect the EXCVA pulley groove for wear and damage.
• If any defects are found, replace the EXCVA pulley with a new
one.
* When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
* Do not use the adjustable wrench to turn EXCVA pul-
ley so as not to cause damage to the internal gear of
EXCVA.
To Next Page
Loading...
