Suzuki LT-A400 - Page 183

Fuel System: 1G-18
3) Remove the carburetor top cap (8).
CAUTION
!
Do not use compressed air on the carburetor
body before removing the diaphragm; this
may damage the diaphragm.
4) Remove the spring (9), spring retainer (10), spacer
(11), jet needle (12) and diaphragm (13).
5) Remove the float chamber body (14).
6) Remove the O-ring (15).
7) Remove the throttle stop screw (16).
8) Remove the float pin (17), float (18) and needle
valve (19).
8
I827H1170002-02
9
10
11
12
13
I827H1170003-03
14
I827H1170004-02
15
I827H1170005-02
16
I827H1170006-02
17
18
19
I827H1170007-02