ENGINE 3-62
VALVE CLEARANCE
l
Check and adjust the valve clearance. (Refer to page 2-5 for
procedures.)
INTAKE PIPE
CAUTION:
When replacing the intake pipe, use a new O-ring to prevent
sucking air from the joint.
l
Coat the O-ring with grease.
VALVE INSPECTION CAP AND CAM TIMING
INSPECTION CAP
l
Before installing the valve inspection caps and cam timing
inspection cap, coat the respective O-rings with grease.
CAUTION:
Replace the respective O-rings with new ones.
Classic Cycles Technical Resources
To Next Page
Loading...
