©2022 Sveaverken. All rights reserved. 24
Sveaverken F100 Auto Steer System Software User Manual
Figure 41.
Calibrate the implement
Automatic calculation of correction value
The system works out the correction value automatically based on the skip or overlap values you
entered.
Manual calculation of correction value
Alternatively, you can calculate and enter the correction value based on your experience or
demand.
Correct
Tap
Correct
, and the correction value is added to the cumulative correction value. You can tap
Correct
repeatedly.
Empty
To clear the automatic or manual correction value, as well as the cumulative correction value, tap
Empty
.
To Next Page
Loading...
