Sveaverken F100 - Basic U-turn

©2022 Sveaverken. All rights reserved. 62
Sveaverken F100 Auto Steer System Software User Manual
5.2 Basic U-turn (Available after activating advanced mode or separate activation
needed under basic mode)
This f ea ture plans the turnin g-around paths for two adjacent guidance lines and autosteers the
vehicle to turn around, so that the vehicle can turn around at the headland easily and flexibly.
Figure 107.
Basic U-turn
Note
: As an advanced feature, Basic U-turn must be activated with an activation code or be
activated along with advanced mode. To obtain the activation code, contact us as described in
section "Technical Support", or contact the local dealer.
5.2.1 Activating Basic U-turn
Tap
Basic U-turn
in the application list, enter the 24-digit activation code in the popup window,
and tap
OK
.
Note
:
1. You need to access the Internet when verifying your activation code.
2. Each activation code can only be used for one terminal.
3. The activ at ion code is case insensit iv e .