©2022 Sveaverken. All rights reserved. 68
Sveaverken F100 Auto Steer System Software User Manual
operation due to limited space or environmental interferences. When the manual intervention is
enabled, hold the steering wheel still, and the system disables the autosteering mode automatically.
To enable
Manual Intervention
, tap
Manual Intervention
in the application list, and turn on the
switch. The sensitivity can be changed via a slider bar. With a higher sensitivity, the system disables
the autosteering mode more easily.
Figure 114.
Manual intervention
5.4 NMEA (Optional cable required)
When
NMEA
is enabled, the GPS information, such as GST, HDT, GGA, RMC, VTG, and ZDA,
received by the system can be shared with an external device.
To enable
NMEA
, tap
NMEA
in the application list, and turn on the switch. Then, you can set the
baud rate, the data type, and the transfer frequency.
Figure 115.
NMEA
Content of Different NMEA Data Types
To Next Page
Loading...
