Swann AMI Oxytrace - Instrument Setup; Establish Sample Flow; Programming

To Next Page

To Previous Page

36 A-96.250.531 / 300617

AMI Oxytrace QED

Instrument Setup

4. Instrument Setup

4.1. Establish Sample Flow

1 Open the flow regulating valve [A] and wait until the flow cell is

completely filled.

2 Switch on power.

3 Adjust the sample flow to 8–25 l/h.

4.2. Programming

Program all parameters for external devices (interface, recorders,

etc.)

Program all parameters for instrument operation (limits, alarms),

see Program List and Explanations, S. 69

Other manuals for Swann AMI Oxytrace