Swann AMI Oxytrace - Operation (Main Menu 4)

66 A-96.250.531 / 300617
AMI Oxytrace QED
Program Overview
8.4. Operation (Main Menu 4)
Sensors Filter Time Const. 4.1.1* * Menu numbers
4.1* Hold after Cal. 4.1.2*
Faraday Parameter Mode 4.1.3.1*
4.1.3* Interval 4.1.3.20*
Delay 4.1.3.3*
Signal Outputs 4.1.3.4*
Output/Control 4.1.3.5*
Relay Contacts Alarm Relay Alarm oxygene Alarm High 4.2.1.1.1*
4.2* 4.2.1* 4.2.1.1* Alarm Low 4.2.1.1.25*
Hysteresis 4.2.1.1.35*
Delay 4.2.1.1.45*
Alarm Saturation Alarm High 4.2.1.2.1*
4.2.1.2* Alarm Low 4.2.1.2.25*
Hysteresis 4.2.1.2.35*
Delay 4.2.1.2.45*
Relay 1/2 Setpoint 4.2.x.100*
4.2.2* - 4.2.3* Hysteresis 4.2.x.200*
Delay 4.2.x.30*
Input Active 4.2.4.1*
4.2.4* Signal Outputs 4.2.4.2*
Output / Control 4.2.4.3*
Fault 4.2.4.4*
Delay 4.2.4.5*
Logger Log Interval 4.3.1*
4.3* Clear Logger 4.3.2*
Eject USB Stick 4.3.3*