Sylvac Scan Series User Manual

2 - 36
Contents
1. Introduction
1.1 Introduction 4
1.2 Safety Notice 3
1.2.1 Follow the indications in the instruction 4
1.2.2 User obligations 4
1.2.3 Personnel obligations 4
1.2.4 Danger in using the system 4
1.2.5 Use in accordance with intended usage 5
1.2.6 Guarantee and responsibility 5
1.2.7 Organisational equipment 5
1.2.8 Protective equipment 5
1.2.9 Informal safety measures 5
1.2.10 Personnel training 5
1.2.11 Control of the system 6
1.2.12 Safety measures in normal operation 6
1.2.13 Electrical hazards 6
1.2.14 Maintenance and repair, fault finding 6
1.2.15 Constructional modifications to the system 6
1.2.16 Cleaning the machine and waste disposal 7
1.2.17 System noise 7
1.3 System Description 8
1.4 Specification SYLVAC-Scan 25 10
1.5 Specification SYLVAC-Scan 50 11
1.6 Specification SYLVAC-Scan 50 Plus 12
1.7 Specification SYLVAC-Scan 50C plus 13
2. Installation
2.1 Visual Inspection 14
2.2 Lifting SYLVAC-Scan 25 14
2.3 Lifting SYLVAC-Scan 50 and 50 Plus 15
2.4 Installing The System 15
2.5 Electrical Connections 15
3. Workholding
3.1 General 17
3.2 Headstock 17
3.3 Tailstock 17
3.4 Tooling 17
4. Operation - Quick Guide
4.1 Measurement Principle 18
4.2 Start-Up 19
4.3 Calibration Mode 19
4.4 Calibrate a Profile Gauge 20
4.5 Calibration Faults 20
4.6 Measurement Mode 20
4.7 Start a Measurement Program 21
4.8 Shut-Down 21
5. Maintenance
5.1 Schedule maintenance 22
5.2 Cleaning and Lubrication 22
5.3 Mechanical SYLVAC-Scan 50 and 50 Plus 23
5.4 LED 24

Sylvac Scan Series Specifications

General

Brand	Sylvac
Model	Scan Series
Category	Measuring Instruments
Language	English