Sylvac Scan Series User Manual

33 - 36
7. EC Conformity declaration
Name of supplier:
SYLVAC SA
Address of supplier.
SYLVAC SA
Chemin du Closalet 16
CH-1023 Crissier
declares under its sole responsibility that
the product
Optical measuring system SYLVAC SCAN 25 / 50 / 50 CE Plus / 50 Plus
Type
902.5250, 902.5500, 902.5501, 902.5502
Serial N
o
See on Measuring equipment
is in conforming with the provisions of
– the directives 98/37/ECC, 2004/108/EC and 2006/95/EC
– the standards
EN 12100-2
EN 60204-1, EN 61000-6-2, EN 61000-6-4, EN 61326-1 (A+B)
– and technical data as specified in our sales documents.
SYLVAC SA
8. Guarantee
All the Sylvac SCAN machines are covered against defects in design, materials and workmanship for
a period of 2 years, from the date of delivery from our factory.
During the warranty period, Sylvac SA will repair or replace the defective product free of charge.
This manufacturer’s warranty does not cover:
 Aging or normal wear and tear
 Any damage resulting from incorrect or abnormal use of the product, and non-observance of
the user manual provided by Sylvac SA
 Indirect or consequential damages of any kind resulting from the use, the non-functioning, the
defects or the inaccuracy of the product
 Any repairs not done by an authorized qualified service partner, e.g. the disassembly of the
product done by a person non-authorized by Sylvac SA
 The periodic check-ups, the adjustments or the maintenance
Sylvac SA owns all parts removed from repaired products. If Sylvac SA repairs or replaces a part of a
product, its warranty term is not extended. In case of replacement the new component has a warranty
of 1 year, without effect on the initial warranty period.
Any further claim against Sylvac SA, e.g. for damages additional to the above described warranty is
expressed excluded.

Sylvac Scan Series Specifications

General

Brand	Sylvac
Model	Scan Series
Category	Measuring Instruments
Language	English