Symetrix 601 - 1.1 Manual Sections; 1.2 Operator Safety Summary

1-2
Rev 2.2, 10/31/94
remainder of this section and Chapter 6, "Fast First Time Setup." Chapter 6 will help you get
connected, tell you what the knobs do, and send you on your way. For MIDI information, go
directly to Appendix C, which describes some of the things that you can do with the 601 using
MIDI.
1.1 Manual Sections
This manual contains the following sections:
Chapter 1. Introduction introduces the 601 and this manual. Describes important safety
information
Chapter 2. Basics lets you know what the 601 does, and how it does it and some basic usage
information..
Chapter 3. Technical Tutorial a basic and not-so-basic discussion of signal levels, input and
output impedances, and connection polarity.
Chapter 4. Front Panel Overview gives a brief look at the controls and switches located on the
front panel of the 601.
Chapter 5. Rear Panel Overview gives a brief look at the rear panel of the 601.
Chapter 6. Fast, First Time Setup is a section written especially for people who just can't wait to
get their hands on the knobs.
Chapter 7. Using the 601 describes the use of the 601 in detail.
Chapter 8. Applications describes some of the myriad uses for the 601.
Chapter 9. Troubleshooting tells what to do if the 601 doesn't work.
Chapter 10. Limited Warranty describes the 601's warranty.
Chapter 11. Repair Information tells how to get your 601 repaired.
Chapter 12. Specifications lists the technical specifications of the 601's performance.
Appendix A. Appendix A describes how to use the realtime MIDI features built into the 601.
Appendix B. Appendix B tells how to use the Lexicon MRC with the 601.
Appendix C. Appendix C describes how to communicate with the 601 via MIDI. This appendix
also contains a description of the 601's Midi implementation.
Appendix D. Appendix D contains a glossary and a useful bibliography.
Appendix E. Appendix E contains the Architects and Engineer's specifications.
Appendix F. Appendix F contains disassembly instructions.
Appendix G. Appendix G contains a listing of the preset programs and other miscellany.
1.2 Operator Safety Summary
The information in this summary is intended for persons who operate the equipment as well as
repair personnel. Specific warnings and cautions are found throughout this manual wherever
they may apply; they do not appear in this summary.