G-7
Rev 2.2, 10/31/94
RAM ROM Name Description
122 250 Dynamics Preferences Hard Knee Compressor/Medium Knee Expander
123 251 Dynamics Preferences Medium Knee Compressor/Medium Knee Expander
124 252 Dynamics Preferences Soft Knee Compressor/Medium Knee Expander
125 253 Dynamics Preferences Hard Knee Compressor/Soft Knee Expander
126 254 Dynamics Preferences Medium Knee Compressor/Soft Knee Expander
127 255 Dynamics Preferences Soft Knee Compressor/Soft Knee Expander
128 256 Initialization Program Used to "zero" any user program (1-127) in the 601 for
creating new programs or for starting over.
Note: Program 256 works by overwriting the selected RAM location (1-127) with a set of rational
settings. Use this program to create a fresh starting point for a program of your own or for
when one of your programming efforts turns into Godzilla and must be destroyed.
Some of the preset programs modify parameters (like the compressor knee) that are accessed
via the real time editor. For this reason, a program built on one of the factory programs (other
than program 256) may work differently than one built on program 256. It is a good idea to find
a preset program that is close to what you want, then modify it and save it.
N
To Next Page
Loading...