Index-i
Index
A-B powering, 3-5
abandon edit, 4-17
AGC
controls, 4-8
parameters,Table 19, C-10
settings, 7-13
tutorial, 2-8
applications, 8-1
a-d converter, 7-6
broadcast, 8-1
channel insert, 7-6
film/post, 8-1
mastering, 8-1
music, 8-1
PA, 8-1
send-receive loop, 7-6
ARM sense parameters, Table 20, C-11
attn tables, C-18
bAt flashing in display, 9-1
battery, dead, 9-1
bibliography, D-11
block diagram, 6-1, 7-4
CH.nn, 4-15
chorus, 2-9, 7-15
CLCI/CLCE, 4-15
clip LED, 4-2
clock source selection, 4-15
comparisons, 4-2, 4-16
compressor
controls, 4-7
parameters. Table 18, C-10
settings, 7-13
settings for voice, 2-8
time constants, 2-8
tutorial, 2-7
connections
channel insert, 7-6
input and output, 3-3
making, 6-1
controls
dynamics, 4-9
input, 4-2
line, 4-3
mic, 4-3
output, 4-14
conventions used, 1-3
critical, 2-2
data dump, 4-15
dead battery, 9-1
de-esser
controls, 4-5
parameters, Table 14, C-9
tutorial, 2-6
default pan table, C-20
delay, 7-14
chorus, 7-15
delay filter table, C-19
delay time table, Table 40, C-18
feedback table, C-19
flanging, 7-14
making echoes, 7-14
modes, 4-13
modulation, 2-9, 7-14, 7-15
parameters, Table 16, C-9
settings, 7-14
tutorial, 2-9
diagram
simplified block, 6-1
differences, digital & analog, 2-1
digital
inputs, 4-14
inputs and outputs, 3-5
output, 5-1
D
IGITAL IN/SYNC LED, 4-3
disable front panel, 4-19
display
gain-reduction, 7-10
headroom, 4-2, 7-10
input level, 7-10
output level, 7-10
display reads 'Er nn', 9-1
display, abbreviations, A-1
dL 1/dL 2/duAL, 4-12
dnAl, 4-15
dnEd, 4-15
downward expander
see also expander, 2-7
downward expansion
tutorial, 2-7
dynamic noise reduction, 7-12
dynamic range, 2-1
echo, 7-14
edit buffer, 4-1
AGC parameters, Table 19, C-10
ARM sense paramters, Table 20, C-11
compressor paramters, Table 18, C-10
de-esser, Table 14, C-9
delay processor, Table 16, C-9
expander parameters, Table 17, C-10
filter 1, Table 11, C-8
filter 2, Table 12, C-8
filter 3, Table 13, C-8
global parameters, Table 10, C-8
To Next Page
Loading...