Index-iii
Operational Details, 7-1
output
analog, 5-1
digital, 5-1
mic level, 7-2
minimum load, 3-2
parameters, Table 22, C-11
P---/PAd, 4-14
P-90, 4-13
pan input table, C-21
parameter
adjustment wheel, 4-1
rate of change, 4-2
parameters
AGC, 4-8
compressor, 4-7
de-esser, 4-5
dynamics section, 4-9
equalizer, 4-3
expander, 4-6
noise reduction, 4-5
phantom powering, 3-5
phasing. see flanging
polarity, 3-3
program
data request,
C-5
example using MIDI, B-1
loading, 4-1
saving, 4-1, 4-16, 7-10
worksheet. G-G-2. G-G-2
write protect, 4-16, 7-10
programmer's worksheet. G-G-2. G-G-2
rate-of-change, 4-2
rEAL, 4-15
realtime MIDI block 1, Table 23, C-12
realtime MIDI block 2, Table 24, C-13
Realtime MIDI, source abbrev, A-1
reinitializing, 4-19
rt, 4-2
safety information, 1-4
safety summary, 1-2
saving
programs, 2-10, 4-1
security, 4-19
setting
AGC, 7-13
analog sources, 6-2
compressor, 7-13
de-esser, 7-12
delay, 7-14
digital sources, 6-4
downward expander, 7-13
equalizer, 7-11
gain, 2-1
MIDI channel, 4-15
MIDI unit number, 4-15
noise reduction, 7-12
scenarios, 4-17
store and recall, 7-10
setup data request,
C-5
signal levels, 3-2
specifications, 12-1
Stand-alone Operation, 7-2
storing
programs, 4-16
switch
AGC, 4-8
AGC attack, 4-8
AGC release, 4-8
bypass, 4-14
compressor attack, 4-7
compressor release, 4-7
compressor threshold, 4-7
de-esser attack, 4-6
de-esser release, 4-6
delay, 4-12
delay group, 4-12
depth, 4-13
DS threshold, 4-5
DS/De-ess, 4-5
EQ freq, 4-4
EQ level, 4-4
EQ width, 4-4
expander, 4-6
expander attack, 4-6
expander ratio, 4-6
expander release, 4-6
expander threshold, 4-7
feedback, 4-13
global, 4-14
level, 4-14
mix, 4-12
NR, 4-5
NR freq, 4-5
NR threshold, 4-4, 4-5, 4-7
pan, 4-14
phantom power, 5-1
power, 5-1
preset, 4-16
rate, 4-13
system, 4-14
system interface, 7-6
table
AGC parameters, Table 19, C-10
AGC ratio, Table 34, C-16
ARM sense paramters, Table 20, C-11
ARM threshold, Table 35, C-17
attn, C-18
To Next Page
Loading...