Symetrix 601 - Performance Data; Midi Implementation; Physical; Electrical

12-2
Rev 2.2, 10/31/94
Performance Data
Frequency Response 12 Hz - 20 kHz +/- 1.5 dB
Mic input EIN -127 dBm, 20 kHz NBW, 150 ohm source
Distortion (THD) < .01% @ 1 kHz, 1V RMS
Dynamic Range >104 dB. This represents the difference
between the largest and smallest signals that
will pass through the
601. Measured using
8192 point FFT with Blackman-Harris
windowing function.
Sample Rates 44.1 kHz, 48kHz
Converter Type Delta-Sigma
Conversion method 18-bit linear, 64X oversampling
Parameter Storage RAM with battery backup
Group Delay 1.4-3.98 ms @ 48 kHz,
1.51-4.11 ms @ 44.1 kHz
Input Headroom Display 9-LED bargraph
Analog Input Clip Indicator Red LED indicates clipping at analog inputs.
Output Headroom Display 8-LED bargraph
Midi Implementation
Access MIDI program change, sysex, aftertouch,
pitch bend, bank select
MIDI channel range 1-128, omni-mode
Accessible parameters Most front panel parameters plus internal
constants
Connectors midi in, midi out
Data dump current program or entire memory
Manufacturer ID 00, 00, 5e
Physical
Size (hwd), in & cm 1.75 x 19 x 7 in
4.44 x 48.26 x 17.78 cm
Weight, lbs & kg 7.6 lbs (3.5kg) net
10 lbs (4.6kg) shipping
Electrical
Power requirements 117V AC nominal, 105-125V ac 50-60 Hz, 20
watts
230V AC nominal, 205-253V ac 50 Hz, 20
watts.
In the interest of continuous product improvement, Symetrix Inc. reserves the right to alter,
change, or modify these specifications without prior notice.