Synrad 32-1 - Page 26

SYNRAD® 32-1 Operator’s Manual Version 2.2
26
Laser Safety
Figure 2-5 32-1 Declaration Document.
Declaration of Conformity
in accordance with ISO / IEC 17050-2:2004
We,
Manufacturer’s Name: SYNRAD® A
©
Novanta Company
Manufacturer’s Address: 4600 Campus Place
Mukilteo, WA 98275 U.S.A.
Hereby declare under our sole responsibility that the following equipment:
Product Name: 32-1 Laser
Model Number: 32-1SAC (*OEM)
Conforms to the following Directive(s) and Standard(s):
Applicable Directive(s): 2014/30/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
2011/65/EU RoHS Directive
Applicable Standard(s):
EN 61010-1:2010 Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 1: General Requirements
EN 61000-6-4:2007 Radiated Emissions, Group 1, Class A
EN 61000-6-4:2007 Conducted Emissions, Group 1, Class A
EN 61000-6-2:2005 Electrostatic Discharge Immunity
EN 61000-6-2:2005 RF Electronic Fields Immunity
EN 61000-6-2:2005 Electrical Fast Transient/Burst Immunity
EN 61000-6-2:2005 Conducted RF Disturbances Immunity
*OEM lasers do not comply with EN 60825-1:2014, Safety of Laser Products. Buyers of OEM laser products are solely
responsible for meeting applicable Directives and Standards for CE compliance and marking.
Corporate Ocer: European Contact:
Mel Lima, Sr. Quality and Reliability Director of SYNRAD
Dated:
MADE IN THE U.S.A.
Novanta Distribution (USD) GmbH
Parkring 57-59
85748 Garching bei München, Germany
900-20976-23 Rev B
IN PROGRESS