Taco SKV SelfSensing

Taco® SKV
52 302-365, Effective: June 5, 2017
© 2017 Taco, Inc.
13.0.3 Main Menu Structure - page 1
0-** Operation / Display 0-37 Display Text 1 0-77 DST/Summertime End 1-36 Iron Loss Resistance (Rfe) 1-82 Min Speed for Function at
Stop [Hz]
0-0* Basic Settings 0-38 Display Text 2 0-79 Clock Fault 1-39 Motor Poles 1-86 Trip Speed Low [RPM]
0-01 Language 0-39 Display Text 3 0-81 Working Days
1-5* Load-Indep. Setting 1-87 Trip Speed Low [Hz]
0-02 Motor Speed Unit
0-4* LCP Keypad 0-82 Additional Working Days 1-50 Motor Magnetization at Zero
Speed
1-9* Motor Temperature
0-03 Regional Settings 0-40 [Hand on] Key on LCP 0-83 Additional Non-Working
Days
1-51 Min Speed Normal Magne- tizing [RPM]
1-90 Motor Thermal Protection
0-04 Operating State at Power-up 0-41 [Off] Key on LCP 0-89 Date and Time Readout 1-52 Min Speed Normal Magne-
tizing [Hz]
1-91 Motor External Fan
0-05 Local Mode Unit 0-42 [Auto on] Key on LCP
1-** Load and Motor 1-58 Flystart Test Pulses Current 1-93 Thermistor Source
0-1* Set-up Operations 0-43 [Reset] Key on LCP 1-0* General Settings 1-59 Flystart Test Pulses Fre-
quency
2-** Brakes
0-10 Active Set-up 0-44 [Off/Reset] Key on LCP 1-00 Configuration Mode
1-6* Load-Depend. Settg. 2-0* DC Brake
0-11 Programming Set-up 0-45 [Drive Bypass] Key on
LCP
1-03 Torque Characteristics 1-60 Low Speed Load Compen-
sation
2-00 DC Hold/Preheat Current
0-12 This Set-up Linked to
0-5* Copy/Save 1-06 Clockwise Direction 1-61 High Speed Load Compen-
sation
2-01 DC Brake Current
0-13 Readout: Linked Set-ups 0-50 LCP Copy
1-2* Motor Data 1-62 Slip Compensation 2-02 DC Braking Time
0-14 Readout: Prog. Set-ups / Channel
0-51 Set-up Copy 1-20 Motor Power [kW] 1-63 Slip Compensation Time
Constant
2-03 DC Brake Cut-in Speed [RPM]
0-2* LCP Display 0-6* Password 1-21 Motor Power [HP] 1-64 Resonance Dampening 2-04 DC Brake Cut In Speed [Hz]
0-20 Display Line 1.1 Small 0-60 Main Menu Password 1-22 Motor Voltage 1-65 Resonance Dampening
Time Constant
2-1* Brake Energy Funct.
0-21 Display Line 1.2 Small 0-61 Access to Main Menu w/
o Password
1-23 Motor Frequency
1-7* Start Adjustments 2-10 Brake Function
0-22 Display Line 1.3 Small 0-65 Personal Menu Pass-
word
1-24 Motor Current 1-71 Start Delay 2-11 Brake Resistor (ohm)
0-23 Display Line 2 Large 0-66 Access to Personal
Menu w/o Password
1-25 Motor Nominal Speed 1-73 Flying Start 2-12 Brake Power Limit (kW)
0-24 Display Line 3 Large
0-7* Clock Settings 1-28 Motor Rotation Check 1-77 Compressor Start Max
Speed [RPM]
2-13 Brake Power Monitoring
0-25 My Personal Menu 0-70 Date and Time 1-29 Automatic Motor Adap-
tation (AMA)
1-78 Compressor Start Max Speed [Hz]
2-15 Brake Check
0-3* LCP Cust. Readout 0-71 Date Format 1-3* Addl. Motor Data 1-79 Compressor Start Max Time
to Trip
2-16 AC Brake Max. Current
0-30 Custom Readout Unit 0-72 Time Format 1-30 Stator Resistance (Rs)
1-8* Stop Adjustments 2-17 Over-voltage Control
0-31 Custom Readout Min Value 0-74 DST/Summertime 1-31 Rotor Resistance (Rr) 1-80 Function at Stop
3-** Reference / Ramps