Taie FU96 - Level 1 (User Level) All Parameters Display

10.4 Level 1 (User Level) All Parameters Display
Level 1
Press SET key
PV / SV
OUTL
Output percentage
AT
Auto tuning
AL1/SOAK/HBAC
AL1  Alarm1 set value
SOAK  Alarm1 soak time
HBAC HBA current setting value
AL2/SOAK/HBAC
AL2  Alarm2 set value
SOAK  Alarm2 soak time
HBAC HBA current setting value
AL3/SOAK
RATE/RAMP
AL3  Alarm3 set value
SOAK  Alarm3 soak time
RATE  Slave SV rate
RAMP  SV ramp operation
PV / SV
※ : If no key is pressed within 60 seconds, it will automatically return to LEVEL 1 (user level) and display PV/SV
21 FY/FU operation manual