Tannoy Qflex User Manual

8.24 DEVICE FIRMWARE
Firmware is the software which runs inside the device. Most products which are controllable from PodWare have
rmware which can be updated by the user.
Firmware is uniquely identied by two things:
1. The Firmware Model Number. This is not the model number of the product, but a number which uniquely describes
the type of rmware used by the device. When updating rmware, the same rmware model must be used.
2. The Firmware Version Number. This describes the issue of the rmware update within a given model number. When
updating rmware, the latest rmware Version Number for a given rmware Model Number would normally be
selected. Firmware updates are usually supplied in .dfw (Device FirmWare) les. PodWare uses a .dfw le to load new
rmware into a device.
Firmware les are named like this: ****5678V1234.DFW
If you are using the very latest Version of Podware then you will be advised automatically when you go online if your
device requires a rmware update
You can inspect the rmware Model and Version in the Device Properties dialogue.
To update the rmware in a device, see Menus or Device Context Menus.
At the bottom right hand side of the screen a blue bar will show the progress of the rmware update. Do not power down
the unit or disconnect any network cable during a rmware update. During the update a red bar will show the progress
of the rmware update (bottom right of screen). The device will then power cycle automatically. The loudspeaker is now
ready for normal operation.
8.25 KEYBOARD SHORTCUTS
PodWare supports the following ‘shortcuts’:
Tab Move to next control
In value boxes:
CTL+C Copy
CTL+V Paste
CTL+X Cut
CTL+Z Undo
On Drop-down, Spin, Push, Fader and radio controls:
PgUp Increase value (coarsely)
PgDown Reduce value (coarsely)
Up/Right arrow Increase value (nely)
Down/Left arrow Reduce value (nely)
On push-button controls:
Space Activate
On Filter Response Panels:
PgUp Increase Width/Slope/Order value
PgDown Reduce Width/Slope/Order value
Up arrow Increase lter gain value
Down arrow Reduce lter gain value
Right arrow Increase lter frequency value
Left arrow Reduce lter frequency value
Tab Move to next lter
Shift Used with mouse drag to adjust Width/Slope/Order value

Tannoy Qflex Specifications

General

Brand	Tannoy
Model	Qflex
Category	Speakers
Language	English