Tascam 24 - Protecting and Editing Songs

TASCAM Model 24
25
4 – Managing Songs
Protecting/unprotecting songs
By protecting a song, you can disable editing, recording and deletion
operations for that song.
You can protect and stop protecting songs.
1.
Open the SONG Screen when the recorder is stopped.(see “Menu
operation procedures” on page 18)
2.
Select the song that you want to protect or unprotect and press the
MULTI JOG dial to open the menu list pop-up.
3.
Select PROTECT or UNPROTECT, and press the MULTI JOG dial.
The PROTECT or UNPROTECT screen will open.
4.
Pres the F4 button to protect or unprotect the song.
NOTE
To cancel protection or unprotection, press the F1
button.
5.
When song protection completes, the SONG Screen reopens.
NOTE
i
icons appear before songs that are protected in the song list
shown for copying, deletion and other operations.
i
If you try to execute a prohibited operation (editing, recording, dele-
tion) on a protected song, "Song is protected." will appear in a
pop-up message on the display.
Editing song names
1.
Open the SONG Screen when the recorder is stopped.(see “Menu
operation procedures” on page 18)
2.
Select the song with name that you want to change and press the
MULTI JOG dial to open the menu list pop-up.
3.
Select RENAME, and press the MULTI JOG dial.
The RENAME Screen will open.
4.
Edit the song name.
For details about how to edit song names, see “Editing textpage
25below.
NOTE
To cancel song name editing, press the F1
button.
5.
When finished editing the song name, press the F4 button
to confirm the song name.
When song name editing is complete, the SONG Screen reopens.
Editing text
Use these operations to edit text.
Changing the cursor (editing point) position
Use the F2 and F3 buttons.
You can also press the MULTI JOG dial to move to the next
character.
Deleting the character at the cursor position:
Turn the MULTI JOG dial.
You can input up to 11 characters, including symbols, numbers, and
uppercase and lowercase letters.
Leaving a single space open:
Turn the MULTI JOG dial to select a blank space at the left end of
any row, and press the MULTI JOG dial.
Canceling edits:
Press the F1 button.
Confirming the changes:
Press the F4 button.