8
TASCAM Model 24
1 – Introduction
About SD cards
This unit uses SD cards for recording and playback.
A list of SD cards that have been confirmed for use with this unit can be
found on our web site. Please access to a product page of this product
from the TEAC Global Site (http://teac-global.com) to find the list or
contact the TASCAM customer support service. Please view the page for
this model. You can also contact TASCAM customer support.
Precautions for use
SD cards are delicate media.
In order to avoid damaging SD cards, please take the following precau-
tions when handling them.
0
Do not leave them in extremely hot or cold places.
0
Do not leave them in extremely humid places.
0
Do not let them get wet.
0
Do not put things on top of them or twist them.
0
Do not hit them.
0
Do not remove or insert them during recording, playback, data trans-
mission or other access.
0
When transporting them, put them into cases, for example.
SD card write protection
This unit writes track information to the media in order to improve
operation performance. Since track information cannot be written to
SD cards that are write-protected, the amount of time needed to read
media will become longer, for example.
Note about formatting
SD cards formatted by this unit are optimized to improve performance
during recording. Use this unit to format the SD cards to be used with it.
Errors might occur when recording with this unit using an SD card for-
matted by a computer or other device.
Notes about power supplies
0
o
o
201:-171111
0
0
o
o
本機使用上の注意
0
0
0
To Next Page
Loading...
