TC Electronic FLASHBACK X4 User Manual

17
Feedback knob / Delay level knob
9 – FEEDBACK knob
9
10
Use the FEEDBACK knob to set the desired numbers of delay re-
peats. Turning the FEEDBACK knob to the right will give you more
delay repeats.
10 – DELAY LEVEL knob
Use the DELAY LEVEL knob to set the desired level of the delay
signal. Turning the DELAY LEVEL knob to the right will increase the
volume of the delay signal.
Unlike the delay level knobs of some other pedals, the DE L AY
LEVEL knob of the Flashback X4 Delay & Looper will not influence
the volume of the dry (unprocessed) signal, since we don’t want to
mess with the original signal from your instrument.
Analog-dry-through allows the analog signal from your guitar to
pass through the pedal without being digitized, even when the
pedal is turned on. This means absolutely zero latency and no tone
coloration.

TC Electronic FLASHBACK X4 Specifications

General

Looper	Yes (40 seconds)
Presets	3
Tap Tempo	Yes
MIDI	Yes
TonePrint	Yes
Current Draw	300 mA
Type	Delay
Inputs	2 x 1/4"
Outputs	2 x 1/4"
Power Source	9V DC
Delay Types	2290, Analog, Tape
True Bypass	Yes (switchable to buffered)