TC Electronic FLASHBACK X4 User Manual

19
Looper level knob
12 – LOOPER LEVEL knob
12
Use the LOOPER LEVEL knob to set the playback volume of the
Flashback X4’s Looper module.
You can still use the delay effect when using the Looper
module. If you do so, use the DELAY LEVEL and the LOOPER LEVEL
knobs to balance the volumes of the effect and the audio loop.

TC Electronic FLASHBACK X4 Specifications

General

Looper	Yes (40 seconds)
Presets	3
Tap Tempo	Yes
MIDI	Yes
TonePrint	Yes
Current Draw	300 mA
Type	Delay
Inputs	2 x 1/4"
Outputs	2 x 1/4"
Power Source	9V DC
Delay Types	2290, Analog, Tape
True Bypass	Yes (switchable to buffered)