18
Looper/Delay switch
11 – LOOPER/DELAY switch
11
Use this LOOPER/DELAY switch to set the functionality of the foot-
switches A, B and C.
– When the switch is in the top position (“Looper”), the four
switches A, B , C and TAP (UNDO/REDO) control the Looper
functions.
The Looper module is explained on page 24.
– When the switch is in the bottom position (“Delay”), the three
switches A, B and C can be used to access the Flashback X4’s
three presets.
Using presets is explained on page 20.
To Next Page
Loading...
