TC-Helicon Perform-V Reference Manual

Effects
Perform-V – Reference manual (updated 2015-11-17) 15
Echo (onboard)
DOUBLE
TONE PITCH
48V
ANTI-
FEEDBACK
REVERB
ECHO
TAP TALK
1
2
3
SET
Echo effect active/highlighted
Otherwise known as “Delay”, Echo effects re-
peat your voice back to you in various ways and
amounts, just like shouting into a mountain range
or very large space. Some Echoes can have
effects applied to the “taps” or repeats of the
Echo, like Megaphone or Radio.
Harmony (beamable)
Additional voices, created from your own, pro-
vide harmony as your own personal backup
singers. We use a combination of the built-in
RoomSense microphone and music coming into
the AUX input to automatically pick the right key
for the harmony voices. You’ll need to have a
chorded instrument near the RoomSense mic
and/or music with chord information coming into
the Aux input for this to work.
Megaphone (beamable)
Anything that filters or distorts your voice falls
into the Megaphone category. You can sound
like you’re on an old radio or distort your voice
for an edgy attack. Be careful with Megaphone
effects when you’ve got a loud PA. We need to
adjust EQ a lot to create these sounds, so they’re
a bit more prone to feedback than other effects.

TC-Helicon Perform-V Specifications

General

Product color	Black
Type	Effects processor
Bit rate	24 bit
Proper use	Concert/Studio
Certification	EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500, CSA
Compatibility	TC Helicon MP-75, MP-76, Sennheiser e 835 FX
Frequency range	20 - 20000 Hz
Headphone out	Yes
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14 W

Weight and Dimensions

Depth	170 mm
Width	167 mm
Height	92 mm