TC-Helicon Perform-V Reference Manual

Perform-V – Reference manual (updated 2015-11-17) a
Safety information 1
Important safety instructions 2
EMC / EMI 4
Explanation of graphic symbols 5
Before you begin 6
About this document 7
Getting support 7
VoiceSupport 7
Please register your Perform-V 8
Introduction 9
Introduction 10
Connection Diagram 11
Effects 13
About Effects 14
Turning Effects On and Off 17
Editing Effects 18
Presets 20
About Presets 21
Importing (Beaming) a Preset 22
Editing a Beamed Preset 23
HIT 24
Tone 2 6
About Tone 27
Anti-Feedback 29
Pitch Correction and Pitch Guide 31
About Pitch Correction 32
Pitch Guide 33
Phantom Power, Mic Control and
talking to your audience 34
48V (Phantom Power) 35
Mic Control 36
Talk 38
Tap (Tempo) 39
RoomSense and Aux 41
RoomSense 42
Aux Input 42
Switch-3 / Switch-6 remote control 43
About the Switch-3/Switch-6 (Pedal) Input 44
Using Switch-3 45
Using Switch-6 45
Appendix 46
Factory Reset 47
Technical Specifications 48
Product Perform-V
Product (firmware) version 1.0
Document Reference manual
Document version / date 2015-11-17

TC-Helicon Perform-V Specifications

General

Product color	Black
Type	Effects processor
Bit rate	24 bit
Proper use	Concert/Studio
Certification	EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500, CSA
Compatibility	TC Helicon MP-75, MP-76, Sennheiser e 835 FX
Frequency range	20 - 20000 Hz
Headphone out	Yes
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14 W

Weight and Dimensions

Depth	170 mm
Width	167 mm
Height	92 mm