Effects
Perform-V – Reference manual (updated 2015-11-17) 18
Editing Effects
Don’t like the Reverb, Double or Echo that you
hear? You can adjust both the Level (volume) and
Style (sound of the effect) to dial in just the right
combination for your music.
To edit an effect, simply press and hold the
respective effect button.
You will know that you are in EDIT mode because
the LED ring surrounding the Control Knob will il-
luminate and the effect button will pulse.
Changing effect level and styles
The LED ring serves as both a Level and Style
control.
As you turn the knob, the LED segments will fill
up, indicating that you are turning up the Level of
the current style.
DOUBLE
TONE PITCH
48V
ANTI-
FEEDBACK
REVERB
ECHO
TAP TALK
1
2
3
SET
Changing the Echo level
DOUBLE
TONE PITCH
48V
ANTI-
FEEDBACK
REVERB
ECHO
TAP TALK
1
2
3
SET
Echo level set to maximum
When you completely fill the LED ring, the color
will change, letting you know that you have now
changed the Style of the effect.
DOUBLE
TONE PITCH
48V
ANTI-
FEEDBACK
REVERB
ECHO
TAP TALK
1
2
3
SET
Color change indicates a new Echo Style has
been selected
Continuing to turn the Control Knob will increase
the Level of that Style and so on.
You can also turn the control knob count-
er-clockwise. E.g., if you lower the level for
Echo Style 3 by turning the control knob count-
er-clockwise and you reach zero, Perform-V will
jump to Echo Style 2 at full level, as indicated by
the LEDs.
Style selection “wraps” in both directions. I.e.,
if you keep on turning the control knob, you will
go from the last to the first style for the currently
edited effect and vice versa.
Each effect has four different styles to choose
from. Three of the styles are available “out of the
box” and one is reserved for a Beamed Preset
Style (described next).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
