TC-Helicon Perform-V Reference Manual

Switch-3 / Switch-6 remote control
Perform-V – Reference manual (updated 2015-11-17) 44
About the Switch-3/Switch-6 (Pedal) Input
When you have connected a Switch-3 or Switch-6
to your Perform-V’s pedal jack (using the TRS
cable that came in the Switch-3/Switch-6 box)
you can control various features remotely.
SWITCH-3
1 2 3
AUX
PEDAL
MIC OUT MIC IN
1 2 3 4 5 6
SWITCH-6
HIT PLAY/REC STOP/CLR LOOP INC
Connecting a Switch-3 or Switch-6 to your
Perform-V’s pedal input
Connecting a Switch-3 or Switch-6
In order to correctly detect a Switch-3 or
Switch-6, it must be connected to Perform-V
before you power up the unit. If you change be-
tween Switch-3 and Switch-6, you must power
your Perform-V on and off again.

TC-Helicon Perform-V Specifications

General

Product color	Black
Type	Effects processor
Bit rate	24 bit
Proper use	Concert/Studio
Certification	EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500, CSA
Compatibility	TC Helicon MP-75, MP-76, Sennheiser e 835 FX
Frequency range	20 - 20000 Hz
Headphone out	Yes
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14 W

Weight and Dimensions

Depth	170 mm
Width	167 mm
Height	92 mm