TC-Helicon Perform-V Reference Manual

Presets
Perform-V – Reference manual (updated 2015-11-17) 24
HIT
Beamed Presets (see “Importing (Beaming) a
Preset”) are capable of turning on one or more
effects with a single button press. We call the
additional effects “HIT”. A common example of
HIT is a Preset that starts out with a simple Re-
verb, then adds both Harmony and Echo via HIT.
You can use HIT either for subtle variations (e.g.
between verse and chorus settings in your bal-
lads) or for really dramatic changes. Feel free to
experiment!
Activating and deactivating HIT
► To toggle HIT on/off, press the Preset button.
The beamed Preset’s green light will change to
blue to indicate that HIT is on.
DOUBLE
TONE PITCH
48V
ANTI-
FEEDBACK
REVERB
ECHO
TAP TALK
1
2
3
SET
HIT off
DOUBLE
TONE PITCH
48V
ANTI-
FEEDBACK
REVERB
ECHO
TAP TALK
1
2
3
SET
HIT on
When you have beamed a Preset to your
Perform-V, HIT is turned on by default.
Editing HIT
HIT is controlled dynamically – which means
you can make changes to each HIT “state” (by
switching effects on and off) whenever you
choose.
As before, you don’t have to save anything man-
ually – the changes are automatically stored.

TC-Helicon Perform-V Specifications

General

Product color	Black
Type	Effects processor
Bit rate	24 bit
Proper use	Concert/Studio
Certification	EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500, CSA
Compatibility	TC Helicon MP-75, MP-76, Sennheiser e 835 FX
Frequency range	20 - 20000 Hz
Headphone out	Yes
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14 W

Weight and Dimensions

Depth	170 mm
Width	167 mm
Height	92 mm