TC-Helicon Perform-V Reference Manual

Safety information
Perform-V – Reference manual (updated 2015-11-17) 3
Service
► All service must be performed by qualified
personnel.
► There are no user-serviceable parts inside.
Warning
► To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture
and objects filled with liquids, such as vases,
should not be placed on this apparatus.
► This apparatus must be earthed.
► Use a three wire grounding type line cord like
the one supplied with the product.
► Be advised that different operating voltages
require the use of different types of line cord
and attachment plugs.
► Check the voltage in your area and use the
correct type.
Voltage Line plug according to standard
110 to 125V UL817 and CSA C22.2 no42.
220 to 230V CEE7 page VII, SR section 107-
2-D1 / IEC83 pageC4.
► This equipment should be installed near the
socket outlet and disconnection of the device
should be easily accessible.
► To completely disconnect from AC mains, dis-
connect the power supply cord from the AC
receptacle.
► The mains plug of the power supply shall re-
main readily operable.
► Do not install this device in a confined space.
► For use at an altitude of 2000m or lower.
► Do not open the unit – risk of electric shock
inside.

TC-Helicon Perform-V Specifications

General

Product color	Black
Type	Effects processor
Bit rate	24 bit
Proper use	Concert/Studio
Certification	EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500, CSA
Compatibility	TC Helicon MP-75, MP-76, Sennheiser e 835 FX
Frequency range	20 - 20000 Hz
Headphone out	Yes
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14 W

Weight and Dimensions

Depth	170 mm
Width	167 mm
Height	92 mm