Setup
VL3X – Reference manual (updated 2015-07-16) 179
Step Button Mode parameter
Use the Step Button Mode parameter to set the
operation mode of the Step button.
► Latched: Tap the button to activate the as-
signed effect, tap it again to deactivate it.
► Momentary: The assigned effect is on only
when you hold down the footswitch.
For more information, see “Change a button
from Latched to Momentary mode”.
Footswitch jack parameter
You can use the Footswitch jack on your VL3X
to connect either a TC-Helicon Switch-3, a
Switch-6 or a second expression pedal.
Parameter settings:
► Expression Pedal*: Use this setting if you
have connected an expression pedal to the
Footswitch jack.
► Switch-3: Use this setting if you have con-
nected a Switch-3 (optional) to the Footswitch
jack.
► Switch-6: Use this setting if you have con-
nected a Switch-6 (optional) to the Footswitch
jack.
* For for information, see “Working with a sec-
ond expression pedal”.
To Next Page
Loading...
Need help?
General
