TC-Helicon VL3X User Manual

Setup
VL3X – Reference manual (updated 2015-07-16) 180
Expr(ession) Pedal
Function parameter
If you have connected a second expression ped-
al to the Footswitch jack, use the Expr(ession)
Pedal Function parameter to assign a function to
this expression pedal.
Expression Pedal Function
parameter settings
The second expression pedal can be assigned
to one of the following controls:
► Off
► Lead Octave Down
► Lead Octave Up
► Harmony Octave Down
► Harmony Octave Up
► Harmony + DoubleLevel
► Delay + Reverb Level
► Harmony Level
► Double Level
► Vocals µMod Level
► Vocals Delay Level
► Vocals Reverb Level
► Synth Level
► Lead Level
► Vocal µMod + Delay + Reverb Level
► Vocal Level
► Aux Level
► Vocal Delay Sends
► Vocal Reverb Sends
► Rhythm Depth
► Rhythm Division
► Stutter Division
► G µMod Level (G = Guitar)
► G Delay Level
► G Reverb Level
► G Delay + Reverb Level
► G Rhythmic Depth
► G Rhythmic Division
► G Amp Post Gain
► G Amp Pre Gain
► G Level
► G Pan
► Looper Level
► Headphone Level
► G Delay Send
► G Reverb Send
Exp(ression) Min(imum)
Pos(ition) parameter
If you have connected a second expression ped-
al to the Footswitch jack, use the Exp(ression)
Min(imum) Pos(ition) parameter in the Setup
menu to define the parameter value that should
be associated with the minimum (down) position
of this second expression pedal.
For more information, see “Expression Pedal tab:
Getting the most out of your expression pedal”.
Exp(ression) Max(imum)
Pos(ition) parameter
If you have connected a second expression ped-
al to the Footswitch jack, use the Exp(ression)
Max(imum) Pos(ition) parameter in the Setup
menu to define the parameter value that should
be associated with the maximum (up) position of
this second expression pedal.
For more information, see “Expression Pedal tab:
Getting the most out of your expression pedal”.

TC-Helicon VL3X Specifications

General

Brand	TC-Helicon
Model	VL3X
Category	Music Equipment
Language	English