Getting to know VL3X
VL3X – Reference manual (updated 2015-07-16) 70
Defining the Global Preset
► Press the Setup button.
► Use < or > to navigate to the System tab.
► Use the Control Knob to highlight “Global Pre-
set”
► Use the Mix Knob below “Global Preset” to
change its value to represent the Preset num-
ber you would like as your Global Preset.
Using an effect from
the Global Preset
► Select a Preset that you would like to link to
the Global Preset.
► Press the Vocal or Guitar button (depending
on which effect you would like to edit).
► Navigate to the effect tab for the effect that
you would like to link to the Global Preset –
e.g. Delay.
Delay effect block settings
► Use the Control Knob to scroll down to the
“Global” parameter. It should say “Off”.
Global set to Off in the Delay block
► Change it to “On” using the mix knob right be-
low the parameter.
Setting Global to On for the Delay block
► Settings from the Global Preset will be applied
to this effect immediately.
► You will also see that the tab name has
changed from “Delay” to “Delay-GBL” – indi-
cating that this particular effect is using Global
settings.
To Next Page
Loading...
Need help?
General
