Getting to know VL3X
VL3X – Reference manual (updated 2015-07-16) 79
Playing Backing Tracks using a Switch-3,
Switch-6 or the STEP footswitch
Here is how to assign Backing Track playback to
a Switch-3, a Switch-6 or the STEP footswitch
on your VL3X.
► Press the SETUP button.
► Use the left or right Arrow to navigate to the
FOOTSWITCH tab.
► Use the Control Knob to select the row con-
taining the switch that you would like to mod-
ify.
► Use the Mix knob to change the button as-
signment to TRACK START.
► There are also controls for STOP, FWD and
BACK if you want more control.
Assigning Backing Track control to
a footswitch on a Switch-3 using the
Buttonmap
Please note that the Switch-3, Switch-6 and
STEP assignments are global and will work for
any Preset that you have assigned a Backing
Track to. This is useful because you don’t have to
sacrifice an effect footswitch in each Preset that
has a Backing Track.
If a Backing Track is playing and a sequence ex-
ists, it’s not possible to change presets. You’ll
need to pause or stop the Backing Track play-
back before presets can be changed.
To Next Page
Loading...
Need help?
General
