DC Inverter Air
5) DRAINAGE PIPE CONNECTION
1.Installing the drain hose
Insert the drain hose into the drain pan, then secure the drain hose with a ylon fastener(we have co nnected the
drain hose to the drain pan in the factory,you just need connect the drain pipe.). Wrap the insulation (dra in
hose) around the drain hose connection.
Be sure to arrange the drain hose so that it is leveled lower than the drain hose connecting port of the
indoor unit.
Remove the hole cover.
2.Drainage test
A.Check wh ether the drain pipe is unhindered and each joint is airproof.
B.Inject 2000ml water into the drain pan to test whether the water flows smoothly.
50/ 113
To Next Page
Loading...
Need help?
General
