39
83488001 Revision N
7. APPLICATION NOTES
The 802 series power supplies are high voltage power sources and great care should be taken when
connecting and operating these units. In order to aid installation and system design, a number of
application notes have been produced to support the design engineer with certain load circuit
component rating and selection. The latest versions of these application notes are available for
download at the TDK-Lambda High Power web site (http://www.us.tdk-
lambda.com/hp/product_html/high_volt.htm).
The following App Notes were available at the time this manual was produced. These documents are
continually being improved and expanded, so always check for the latest revision on-line.
APP Note 500: Calculating Capacitor Charge Time
APP Note 502: Calculating AC Line Currents
APP Note 505: Charging units as Continuous Output DC Supplies
APP Note 507: Charging Large Load Capacitors
APP Note 509: What is Regulation and Repeatability?
APP Note 513: Power Factor Correction
APP Note 517: Protection Against Voltage Reversal
If there are any other application issues or questions that are not covered in these Application
Notes, or elsewhere in this manual, please do not hesitate to contact the factory and our team
of experienced HV application engineers.
Contact the Factory – We are here to help!
Tel: +1 732 922 9300 x229
Fax: +1 732 922 1441
To Next Page
Loading...
