ERROR ERROR MESSAGE ERROR DESCRIPTION
+326 “Output-Off shutdown” Output-Off occurred from front panel button
+327 “Enable Open shutdown” Enable Open occurred from rear panel J1
+340 “Internal message fault” General non-specified Internal message fault
+341 “Input overflow” LAN card input data buffer is too full.
+342 “Internal overflow” Serial receive buffer in LAN card is full because the Main micro
sent too many characters
+343 “Internal timeout” LAN card did not receive response from power supply before
timeout period
+344 Internal checksum LAN card received checksum error, from supply
+345 “Internal checksum error” LAN card detected checksum error in message from supply
+399 “Unknown Error” Error not known
59
To Next Page
Loading...
