Teac AG-V3050 - VIDEO OPERATIONS; Playing Video Sources; Video Tape Dubbing

VIDEO OPERATIONS
[ Playing Video Sources _
Recording with a Video Deck
Note:
For playing video software using a certain Surround
Effect function, refer to the SURROUND EFFECTS
section.
POWER
ON
m&
:
Video
signals
CS
:
Audio
signals
‘ol
C)
i——]
==
y}
°O@®O
CI
@®@
ooo
1
4 » TV monitor
VCR
1/VCR
2
2
[>
3
3
Speakers
Tape Dubbing (from VCR 2 to VCR 1)
1. Press the VCR 1 or VCR 2 button.
2. Play the component corresponding to the button
pressed.
3. The picture from the video source can be seen on
the TV and the sound from the video source will be
heard from the speakers.
—13—
POWER ON m& : Video signals
CS : Audio signals
[=} =a
EF S06
oo Ses Oe =>
@ ooo
bl
VCR 2 3 4
Playback
VCR 1
Recording
. Press the VCR 1 DUBBING button so that the
VCR 1 DUBBING indicator appears in the display.
Press the VCR 2 button with the TAPE 2 MONITOR
set to OFF.
. Operate VCR 2 for playback.
Operate VCR 1 for recording . In this way, the
video/audio signals from VCR 2 can be dubbed onto
VCR 1.