16
Connecting the speakers
Connect the speaker cables that are already attached to
the included speakers to this unit's speaker terminals.
Right speaker Left speaker
While pressing the lever, insert the end of the cable
(where the wire is exposed). Release the lever to con-
nect the speaker cable.
Connections (continued)
Connect the end of the ¥ speaker cable with the red
mark to the red speaker terminal of the unit.
Connect the end of the ^ speaker cable with no mark
to the black speaker terminal of the unit.
o Gently pull the cables to make sure they are con-
nected firmly.
o Confirm that only the exposed part of the wire is
inserted into the terminal and that the cable sheath
is not touching the terminal.
o A short could occur if the exposed core wire at the
tip of a speaker cable touches another cable or
terminal.
o Never let the speaker cables short.
o In order to avoid noise, do not bundle speaker cables
with power cords or other cables.
The included speakers have bass ports in their backs.
Place the speakers so that these ports are not blocked
by, for example, other objects or walls.
Bass port
Speaker cable
To Next Page
Loading...
Need help?
General
Weight and Dimensions
