Teac MC-D800 User Manual

60
Listening to a connected device
You can connect the audio output jack or headphones
jack of a portable audio player or other device to this
unit and listen to its audio playback through this unit.
1 Use a commercially-available audio
cable to connect the headphones jack
(or audio output jack) of a portable
audio player or other device to the ana-
log audio input jacks (AUX IN) on the
back of the unit.
2 Press the PHONO/AUX button to select
“AUX”.
Z
3 Start playback on the playback device.
Then, adjust the volume of both this
unit and the connected device.
o If the volume is not raised on an audio player
when its headphones jack is connected to this
unit, no sound will be output from this unit.
o If you raise the volume level of the connected
device too high, the sound might distort. If this
occurs, lower the volume of the connected
device until distortion stops and then adjust the
volume on this unit.

Teac MC-D800 Specifications

General

Type	Belt-drive audio turntable
CD player	Yes
MP3 bit rates	8 - 320 Kbit/s
Product color	Black
Wow & flutter	0.35 %
Playback modes	Repeat, Shuffle
Volume control	Rotary
Turntable speeds	45, 78 RPM
FM preset stations	20
Disc types supported	CD, CD-DA, CD-R, CD-RW
Supported radio bands	AM, FM, PLL
Audio formats supported	MP3, PCM, SBC, WMA
Signal-to-Noise Ratio (SNR)	70 dB
USB version	2.0
Bluetooth range	10 m
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP
USB ports quantity	1
Headphone connectivity	3.5 mm
Impedance	8 Ω
Speaker type	2-way
Frequency range	50 - 20000 Hz
RMS rated power	20 W
Woofer diameter	88.9 mm
Tweeter diameter	38.1 mm
Number of speakers	2
Package depth	500 mm
Package width	610 mm
Package height	320 mm
Package weight	13700 g
Display type	LCD
Power supply type	AC
AC adapter frequency	60 Hz
AC adapter input voltage	120 V

Weight and Dimensions

Weight	6600 g
Product dimensions (WxHxD)	400 x 206 x 386 mm
Satellite speaker dimensions (WxDxH)	144 x 154 x 224 mm