- 115 -
EO3-11070
MA-1650-4 SERIES
OTHER FIXED DATA (unchangeable)
NOTES: 1. The name in Standard Program for the Amount Mark in Item Code 7 is set with a blank after a
RAM Clear. When the specific Amount Mark for the domestic currency is required on sales
receipts (such as £, F, $), you must program the entire contents of Item Code 7.
2. The Cashier Symbol to be set in Item Code 8 (“CL” in Standard Program) will be used to print the
2-digit Cashier ID code on a validation slip. On receipts, the name of each cashier programmed
in the CASHIER CODE AND NAME PROGRAMMING operation will be printed.
3. If no programming is performed for an item, the name in the ”Standard Program” column will
automatically be active. Therefore, program only the items that require changes from the
standard print data.
4. On the following page, two tables are placed for other fixed or auto-preset data for printing various
symbols, items, or descriptors.
5. When the Check Track option is selected, Item Codes 11 and 12 are used to print when [PICK
UP BAL] and [CODE OPEN] keys are used respectively. Therefore, both of them should be
changed into a different name, such as “CUS CODE #”, ”FILE NO.”, etc. (followed by the actual
Customer File Code No. on receipts).
OTHER AUTO-PRESET DATA (programmable)
The following data are automatically preset in program memory. However, when the corresponding items’ names
are programmed in the corresponding Submodes, the programmed name will be active instead of the preset data.
Item Fixed Data Remarks
RAM Clear RAM-C
Data Clear DATA-C
Status Clear STATUS-C
Program Mode Symbol P Used as header in “SET” or “BLIND” mode print
System Option Address/# Symbol #
Percent Rate Symbol %
Taxable Status Mark T
Food Stampable Status Mark F
Negative Amount Mark -
Quantity Extension Mark x
Sub-link Dept/PLU Mark ↑ for Dept-to-Dept or PLU-to-PLU link entries
SI-net Status Mark S (SI = Selective Itemizer 1 and/or 2)
Misc MISC Report Print for Master-Satellite System
Item Preset Data Remarks (Corresponding Submode No.)
Major Group M G P xx xx = Major Group Code (14)
Minor Group G P xx xx = Minor Group Code (13)
Department D P xx xx = Department Code (3)
Credit Card Company ID CRTxx xx = Credit Company Code (21)
Cashier Symbol xxCL xx = Cashier ID Code (2)
Salesperson Symbol S P xx xx = Salesperson Code (20)
PLU Group PLU GPxx xx = PLU Group Code (29)
To Next Page
Loading...
