- 37 -
EO3-11070
MA-1650-4 SERIES
CANCEL
This can be operated when a SUSPENDING condition arises due to a TIME OUT or a SUSPENDING operation.
The entire in-line service being performed is canceled. This operation is effective to in-line read report operations
but not to any in-line reset report operations.
OPERATION MASTER TERMINAL: (Mode Lock: X)
Depress [X].
DESCRIPTION:
The CANCEL symbol is printed as in the following.
CANCEL Print Format
As part of the print out, the Store/Reg. No. of the terminal and its status will be printed.
Status Print Format
Status Symbol
?: No response (power off, etc.)
BUSY: The terminal is busy (during a sale, etc.)
Blank: Other statuses
No nnnnnn ?
Store/Register No.
➤
➤
========================
To Next Page
Loading...
