- 127 -
EO3-11070
MA-1650-4 SERIES
NOTE: A maximum of 12 regular-sized or 6 double-sized characters may be entered for a company name. A
combination of both types is also available. (See CHARACTER ENTRIES at the beginning of this
chapter.)
ex.) To assign the ID codes and program the names as follows:
CODE NAME
Mode Lock to SET.
21 [X].
1 ABC 1 [ST] 401 [#] (A)
402 [#] (h)
403 [#] (C)
[ST]
2 LMN 2 [ST] 412 [#] (L)
413 [#] (M)
414 [#] (N)
[ST]
3 OPQ 3 [ST] 415 [#] (O)
500 [#] (P)
501 [#] (Q)
[ST]
4 XYZ 4 [ST] 508 [#] (X)
509 [#] (Y)
510 [#] (Z)
[ST]
[AT/TL]
➤
1 to 12
assigned by the store
Repeat for other companies.
➤
➤
➤
➤
*
* (For sequentially
programming codes,
the ID code specifica-
tion can be skipped.)
........
See NOTE below.
➤
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P21
01 ABC
02 LMN
03 OPQ
04 XYZ
0051
CREDIT CARD COMPANY ID CODE AND NAME PROGRAMMING
(Submode 21)
This operation programs the name of each credit card company. In sales entries, credit cards of maximum 12
different companies may be used by entering the ID code for the company (1 to 12) and then depressing the
[CARD No.] key prior to the [Chg] key for finalizing a sale. If no name is programmed for the company ID code,
the auto-preset name (“CRT01” to “CRT12”) will be printed as the credit card company name on sale receipts and
reports.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
21 [X] |Company ID Code| [ST] Character Entries [ST] [AT/TL]
To Next Page
Loading...
