- 162 -
EO3-11070
MA-1650-4 SERIES
PLU ADDITION TO PLU ADDITIONAL TABLE FILE (Submode 64)
This submode is used to add PLUs in the PLU Additional Table File.
This programming is available only when the expansion memory is installed.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
64 [X] Follow the operation of Submode 4 (after “4 [X]”) in this chapter.
NOTE: A maximum 200 PLUs can be programmed in the Additional PLU Table File.
■ PLU MERGE
This operation is used to merge all the PLUs in the Additional Table File into the PLU Table File (Main PLU
Table File). This is usually operated at the end of the day.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
40 [AT/TL]
NOTE: This operation is accepted only when there is a vacant area in the Main PLU Table File enough to accept
the number of PLUs programmed in the Additional PLU Table File.
➤
➤
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
PLU MERGE
0356
To Next Page
Loading...
