- 173 -
EO3-11070
MA-1650-4 SERIES
Dept. 1 and Dept. 3 are programmed with SI-net-status. On depressing [SI/TL], “0.03” (which is 1% of total amount of Dept. 1 “1.00”
+ Dept. 3 “2.00”) is displayed and printed, and 3 stamps are to be issued to the customer in this case. The sale total “4.50” is not affected
by the SI calculation.
Other stores may use it for calculating the discount amount for certain sales items during a special discount
sales period by presetting the discount % rate on the SI and programming SI-net status to certain Departments
and PLUs which are subject to the special discount.
Example 2) With option “SI Special Discount”:
Key Operation in REG Mode Receipt/Journal Print
100 [DEPT 1] (SI-net)
150 [DEPT 2] (non-SI)
200 [DEPT 3] (SI-net)
[SI/TL] (1% is preset)
[AT/TL]
DP
01 1.00 S
DP
02 1.50
DP
03 2.00 S
SI TL 0.03
CASH
4
.
50
Number of stamps
to be issued.
“S”: SI-net Symbol
100 [DEPT 1] (SI-net)
150 [DEPT 2] (non-SI)
200 [DEPT 3] (SI-net)
[SI/TL] (10 % is preset)
[AT/TL]
DP
01 1.00 S
DP
02 1.50
DP
03 2.00 S
SI TL -0.03
CASH
4
.
20
Discount Amount
resulted by SI %
A preset % rate may be programmed for each of SI1 and SI2 (on the preceding page), and whether the
calculated amount will add to, subtract from, or non-affect the sale total is a selective option. Whether the
amount resulted by depressing the [SI/TL] key will print or non-print is another selective option. (Refer to
System Option Address 5 Table.)
The applications of this function may vary from store to store. Some stores may use it for counting the service
stamps to be issued to the customers according to the sale amount of service-stampable items. In this case,
the option “SI Total Non-affects Sale Total” should be selected, and a preset % rate, 1% for example, may be
set to issue one service stamp for every $1.00. Thus the number of stamps to be issued to the customer is
displayed (and printed if so programmed) as a result of calculation with the preset % rate, but the resulted value
(the number of stamps in this case) will not affect the sale total.
Example 1) With option “SI Total Non-affects Sale Total”:
Key Operation in REG Mode Receipt/Journal Print
On depressing [SI/TL], “-0.30” (which is 10% discount from the total amount of Dept. 1 + Dept. 3 items) is displayed and printed, and
that amount is subtracted from the sale total. (4.50 - 0.30 = 4.20)
To Next Page
Loading...
