- 76 -
EO3-11070
MA-1650-4 SERIES
➤
2 [X]
| Cashier Code | [NS]
1 [ST]
(See NOTE 1 below.)
○○○
○○○
.... For sequentially porgramming the address, the
Address number specification can be skipped.
[AT/TL]
Character Entries
(max. 12 characters)
[ST]
For Address 1 : Cashier Name
2 [ST]
For Address 2 : Cashier Status
| Cashier Status | [#]
0: Cashier for Sale Entries
1: Cashier for Training Entries
.
.
.
Submode No.
Repeat for
another cashier.
Standard Memory Expansion Memory
Code Entry Type 1 to 15 1 to 99
Cashier Push-stay 1 to 4, 99* ---
Key Type [CLK] key 1 to 8, 99* ---
---------
------
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
CASHIER CODE AND NAME PROGRAMMING (Submode 2)
Programming
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
NOTES: 1. The following table shows the Cashier Codes that can be entered (the capacity is determined by
the RAM Allocation Setting).
* The Cashier Code 99 for the Cashier Key Type is fixed as a code of a cashier for Training
Entries.
2. For the name of each cashier, a maximum of 12 regular-sized or 6 double-sized characters can
be entered. A combination of both types is also available. (At least one character must be entered
here.)
3. When adopting the Push-stay Cashier Key, the cashier key “OFF” status is required for this
programming.
To Next Page
Loading...
