To Next Page

To Previous Page

- 94 -

EO3-11070B

MA-1650-4 SERIES

Address No. Description of Programming Contents

-- Continued --

6 Tax Status

• Enter one- to four-digit Status Codes for applicable Taxes.

[#]

0: Non-taxable

(More than one code can be entered for

1: Tax 1 (Tax 1 taxable)

combining Tax1 to Tax4 taxable status.

2: Tax 2 (Tax 2 taxable)

For example, enter 12 to select Tax1

3: Tax 3 (Tax 3 taxable)

and Tax2 taxable status.)

4: Tax 4 (Tax 4 taxable)

NOTE: In case of inclusive tax, the combination of the tax status is unavailable. Only

one inclusive tax status can be programmed for a PLU. (Tax 3 taxable or Tax

4 taxable) (Applicable for V1.9 or after)

7 Unit Price of Individual Split Package

(for HI-CONE PLUs only; on V2.0 or after, the unit price of individual split package

can be programmed regardless of the HI-CONE status.)

• For preset the unit price of individual split package, enter a maximum of 6-

digit price, and depress [#].

• To cancel the unit price of individual split package, enter 0 and depress [#].

(When the unit price of individual split package is not preset (or 0), whole

package price (Address 3 setting) will be used in the registration.

Tare 2 Rate

If the scale status is set, and there is any value in this area, Tare 2 rate is used.

(0 to 9999; 0% to 99.99%)

8 Whole Package Quantity (for Split Package Pricing PLUs)

[#]

Enter the whole package quantity in max. 2 digits (1 to 99), or enter 0 to cancel

the Split Package Pricing status. Be sure to set a whole package quantity here

for PLUs with HI-CONE Status (Address 4 - Code 6) or Mix & Match Group No.

(Address 13).

NOTES: • This setting is not allowed for PLUs with the Scale-compulsory status.

• When the option “Preset Point for one decimal digit” is selected, this

setting is not allowed to any PLUs.

-- Continued on next page --

TEC MA-1650-4 Series User Manual

Questions and Answers: